1.Maintenance free:
Internal visible colloidal components, can work normally without any maintenance.
in non-startup areas,Large batteries for energy storage can be used as colloids to avoid acid stratification,There is a certain amount of product cycle life the advantages.
The internal colloid can protect the electrode plate from damage caused by bumpy driving and vibration.
The internal colloid can prevent the plate from being corroded, and also reduce the battery’s generation of poles when starting with a high current.Plate bending between the plate short circuit, chemical protection.
The sealed structure of the gel battery and the gel electrolyte, the electrolyte is not prone to acid stratification during use, which avoids a large amount of electrolyte leakage and penetration during the use of traditional lead-acid batteries.
1. High internal resistance, poor discharge performance at high current, not suitable for motorcycle start-up.
2. The colloid is easy to be hydrolyzed when it is heated during the loading and shipping process, resulting in the phenomenon of acid.
3. The cost of colloid is higher.Gel batteries are more expensive than wet cells, which is one of the most significant disadvantages.
4. The internal resistance of the gel battery is relatively large, which has a certain influence on the instantaneous high current discharge of the motorcycle battery.
Finally
It is recommended to use colloidal batteries because of the long life and low maintenance costs.
If you are still struggling to choose where to buy gel batteries, TCS batteries are the best choice.
Why Chose TCS Battery?
1.Guaranteed startup performance.
2.The purity of electrolytic lead is more than 99.994%.
3.100% Pre-delivery inspection.
4.Pb-Ca grid alloy battery plate.
5.ABS shell.
6.AGM clapboard paper.
7.Complete sealed, maintenance free.